Pneumatic Chucks Series

Pull Back Power Chuck Fixtures

PLVENEW

Pull Back Power Chuck Fixtures

Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.

  1. Rust-proof for Pneumatic Cylinder: Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
  2. Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
  3. Heavy Duty Clamping Design: Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor't deform.

Specifications

Unit / mm
MODEL / SPEC. A B C D E F Max. F min. G Max. G min. H I K M
PLVE-06 224 169 M10x1.5P(PCDØ202) 17 140 45.65 35.65 14.65 4.65 70 - 35 Ø11(PCD 202)
PLVE-08 265 210 M10x1.5P(PCDØ243) 17 154 57.15 47.15 16.15 6.15 84 26 40 Ø11(PCD 243)
PLVE-10 315 254 M12x1.75P(PCDØ285) 20 185 67.6 51.6 21.6 5.6 100 32 50 Ø13(PCD 285)
MODEL / SPEC. N max. N min. P Q Piston Area
(cm2)
Plunger Stroke
(mm)
Jaw Stroke [Diameter]
(mm)
PLVE-06 56.69 54.01 3-M6x1P(PCDØ80) 3-M6x1P(PCDØ120) 91 10 5.3
PLVE-08 69.56 66.88 3-M10x1.5P(PCDØ136) 3-M10x1.5P(PCDØ186) 160 10 5.3
PLVE-10 87.44 81.61 3-M12x1.75P(PCDØ170) 3-M12x1.75P(PCDØ230) 215 16 11.6
MODEL / SPEC. Max. Gripping Force
kgf (KN)
Max. Pressure Setting
kgf/cm2 (Mpa)
Gripping Force
At Air Pressure 7kgf/cm2 (0.7Mpa)
kgt (KN)
Gripping Range
PLVE-06 2950 (29) 16 (1.57) 1270 (12.5) Ø35~Ø160
PLVE-08 4890 (48) 15 (1.47) 2240 (22) Ø40~Ø210
PLVE-10 4990 (49) 16 (1.57) 2140 (21) Ø50~Ø254

Dimensions

Pull Back Power Chuck Fixtures

Operation Example

Pull Back Power Chuck Fixtures
OPEN