PLVE

3-Jaw Pull Back Power Chuck Fixtures

Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.
1.Rust-proof for Pneumatic Cylinder:Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof:Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design:Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor't deform.

DIMENSIONS

SPECIFICATIONS

UNIT/mm

Inquiry MODEL / SPEC A B C
D E F
max.
F
min.
G
max.
G
min.
PLVE-06 224 169 M10×1.5P(PCDø202) 17 140 45.65 35.65 14.65 4.65
PLVE-08 265 210 M10×1.5P(PCDø243) 17 154 57.15 47.15 16.15 6.15
PLVE-10 315 254 M12×1.75P(PCDø285) 20 185 67.6 51.6 21.6 5.6
MODEL / SPEC H I K M N
max.
N
min.
P
Q
PLVE-06 70 -- 35 ø11(PCDø202) 56.69 54.01 3-M6×1P(PCDø80) 3-M6×1P(PCDø120)
PLVE-08 84 26 40 ø11(PCDø243) 69.56 66.88 3-M10×1.5P(PCDø136) 3-M10×1.5P(PCDø186)
PLVE-10 100 32 50 ø13(PCDø285) 87.44 81.61 3-M12×1.75P(PCDø170) 3-M12×1.75P(PCDø230)
MODEL / SPEC Piston Area
(cm2)
Plunger
Stroke
(mm)
Jaw Stroke
[Diameter]
(mm)
Max.Gripping
Force
kgf(kN)
Max Hydr.
Pressure
kgf/cm2(MPa)
Gripping
Range
PLVE-06 91 10 5.3 2950(29) 16(1.57) ø35~ø160
PLVE-08 160 10 5.3 4890(48) 15(1.47) ø40~210
PLVE-10 215 16 11.6 4990(49) 16(1.57) ø50~ø254

OPERATION EXAMPLE