MEL,MELT

NEW

Crank Type Long Jaw Stroke Hollow Power Chuck Fixtures

DIMENSIONS
SPECIFICATIONS
DIMENSIONS
proimages/products/01-Hydraulic_Chuck_Series/MEL/MEL-dim.png
SPECIFICATIONS

Unit / mm

Model / Spec. A B C D E F G H
MEL-06 224 178 28 17 157 37.6 20 73
MEL-08 265 220 38 17 177 39.5 25 95
MEL-10 315 265 61 20 212 43.1 30 110
MELT-06 224 178 28 17 157 37.6 20 73
MELT-08 265 220 38 17 177 39.5 25 95
MELT-10 315 265 61 20 212 43.1 30 110
Model / Spec. I
max.
I
min.
J K L M
max.
M
min.
MEL-06 19.55 10.55 12 31 18 50.13 38.03
MEL-08 20.55 11.55 14 35 18 61.0 44.96
MEL-10 24.55 11.05 16 40 18 78.16 59.37
MELT-06 19.55 10.55 12 31 18 50.13 38.03
MELT-08 20.55 11.55 14 35 18 61.0 44.96
MELT-10 24.55 11.05 16 40 18 78.16 59.37
Model / Spec. N
max.
P
min.
Q R Thru-Hole [Diameter]
(mm)
MEL-06 Ø11(PCDØ202) 3-M8×1.25P(PCDØ160) 3-M8×1.25P(PCDØ120) M10×1.5P(PCDØ202) 28
MEL-08 Ø11(PCDØ243) 3-M8×1.25P(PCDØ190) 3-M8×1.25P(PCDØ140) M10×1.5P(PCDØ243) 38
MEL-10 Ø13(PCDØ285) 3-M12×1.75P(PCDØ230) 3-M12×1.75P(PCDØ180) M12×1.75P(PCDØ285) 61
MELT-06 Ø11(PCDØ202) - 6-M8×1.25P(PCDØ145) M10×1.5P(PCDØ202) 28
MELT-08 Ø11(PCDØ243) - 6-M10×1.5P(PCDØ180) M10×1.5P(PCDØ243) 38
MELT-10 Ø13(PCDØ285) - 6-M12×1.75P(PCDØ230) M12×1.75P(PCDØ285) 61
Model / Spce. Piston Area
(cm2)
Plunger Stroke
(mm)
Jaw Stroke [Diameter]
(mm)
Max. Gripping Force
kgf (KN)
Max. Hydr.
Pressure
kgf/cm2 (Mpa)
Gripping
Range
MEL-06 85 15 24 2670 (26) 30 (3.0) Ø20~Ø178
MEL-08 154 20 32 3900 (38.2) 24 (2.4) Ø30~Ø220
MEL-10 199 25 37.5 5586 (54.7) 26.5 (2.6) Ø45~Ø265
MELT-06 85 15 24 1790 (17.6) 20 (2.0) Ø25~Ø178
MELT-08 154 20 32 2600 (25.5) 16 (1.6) Ø30~Ø220
MELT-10 199 25 37.5 3724 (36.5) 18 (1.8) Ø45~Ø265