PLVE

NEW

Pull Back Power Chuck Fixtures

Product Introduction

Pull Back Power Chuck Fixture is ideal for machining application on working table, workpiece can be clamped firmly not lift up; it is suitable for heavy cutting as well as the casting and forging machining.

  1. Rust-proof for Pneumatic Cylinder:Insid wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
  2. Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
  3. Heavy Duty Clamping Design:Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and wor't deform.
DIMENSIONS
SPECIFICATIONS
OPERATION EXAMPLE
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/PLVE/PLVE_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E F Max. F min. G Max. G min. H I K M
PLVE-06 224 169 M10x1.5P(PCDØ202) 17 140 45.65 35.65 14.65 4.65 70 - 35 Ø11(PCD 202)
PLVE-08 265 210 M10x1.5P(PCDØ243) 17 154 57.15 47.15 16.15 6.15 84 26 40 Ø11(PCD 243)
PLVE-10 315 254 M12x1.75P(PCDØ285) 20 185 67.6 51.6 21.6 5.6 100 32 50 Ø13(PCD 285)
MODEL / SPEC. N max. N min. P Q Piston Area
(cm2)
Plunger Stroke
(mm)
Jaw Stroke [Diameter]
(mm)
PLVE-06 56.69 54.01 3-M6x1P(PCDØ80) 3-M6x1P(PCDØ120) 91 10 5.3
PLVE-08 69.56 66.88 3-M10x1.5P(PCDØ136) 3-M10x1.5P(PCDØ186) 160 10 5.3
PLVE-10 87.44 81.61 3-M12x1.75P(PCDØ170) 3-M12x1.75P(PCDØ230) 215 16 11.6
MODEL / SPEC. Max. Gripping Force
kgf (KN)
Max. Pressure Setting
kgf/cm2 (Mpa)
Gripping Force
At Air Pressure 7kgf/cm2 (0.7Mpa)
kgt (KN)
Gripping Range
PLVE-06 2950 (29) 16 (1.57) 1270 (12.5) Ø35~Ø160
PLVE-08 4890 (48) 15 (1.47) 2240 (22) Ø40~Ø210
PLVE-10 4990 (49) 16 (1.57) 2140 (21) Ø50~Ø254
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/PLVE/PLVE_view.jpg