RT

ROTARY AIR CHUCK FIXTURES
( INTERMITTENT OPERATION )
Suitable for light cutting
It's ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table.The distinctive feature is that the chuck rotates with the spindle of indexing table or rotary table.

Product Introduction

It's ldeal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that chuck rotates with the spindle of indexing table or rotary table.

  1. The chuck is designed for intermittently rotate in limited rotary speed with rotary table.
  2. Rustproof treated cylinder : The cylinder won't get rusty and seized even in wet or hign moisture working environment.
  3. Integral pneumatic cylinder :Connect chuck and built-in cylinder to each other directly;thus enables operation stability.Moreover,it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.
DIMENSIONS
SPECIFICATIONS
OPERATION EXAMPLE
DIMENSIONS
proimages/products/02-Pneumatic_Chucks_Series/RT/RT_dim.jpg
SPECIFICATIONS

Unit / mm

MODEL / SPEC. A B C D E F G H I J K L
RT-05 140 85 16 60 6 182 33.6 62 14 10 25 6-M8×1.25P
RT-06 170 93 20 80 7 215 40.4 73 20 12 31 6-M8×1.25P
RT-08 215 112 30 110 8 255 42.4 95 25 14 35 6-M10×1.5P
MODEL / SPEC. M Nmax. Nmin. O max. O min. P Q R Thru-Hole
(Diameter) mm
Piston Area (cm2) Plunger Stroke (mm) Jaw Stroke (Diameter) mm
RT-05 PCDØ118 26.93 24.62 20.05 6.55 26 - 3-M8×1.25P
(PCDØ92)
16 74 10 4.6
RT-06 PCDØ147 36.46 33.69 21.55 15.55 26 - 3-M10×1.5P
(PCDØ130)
20 120 13 5.5
RT-08 PCDØ185 44.92 41.52 29.55 17.55 27 3-M10×1.5P
(PCDØ186)
3-M10×1.5P
(PCDØ146)
30 190 16 6.8
MODEL / SPEC. Max.Speed
r.p.m (min-1)
Max. Pressure
kgf/cm2 (Mpa)
Gripping Force
At Air Pressure
7kgf/cm2 (0.7Mpa)
kgf (KN)
Gripping
Range
RT-05 51 7 (0.7) 1340 (13.1) Ø4-Ø140
RT-06 41 7 (0.7) 2330 (22.8) Ø25-Ø170
RT-08 33 7 (0.7) 3730 (36.5) Ø33-Ø215
OPERATION EXAMPLE
proimages/products/02-Pneumatic_Chucks_Series/RT/RT_demo.jpg